Nikko Steel Kawat Las Elektroda Self Gas Shielding Tubular Wires Surfacing Alloys FC-60

Brosur & Katalog Produk / Brosur & Katalog Produk

304 views
0 Likes
0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 11 FC-60 SELF GAS SHIELDING FLUX AND METAL FILLED CORED WIRE FOR HARD FACING APPLICATIONS INVOLVING ABRASION AND IMPACT DATA SHEET NO. 162 SPECIFICATION DIN 8555 CLASSIFICATION MF10- 60-GC PRODUCT DESCRIPTION A self-shielded flux cored wire that deposits chromium carbides in the weld matrix to have the hardness in the range 56~62 HRC. The deposit has very high hardness which giving resistance to extreme abrasion, high temperature stability and some corrosion resistance. The minerals dissociate during welding to provide a full protective self-shielding gas which eliminates the need for an external separate shielding gas. WELDING FEATURES OF THE ELECTRODE Suitable for use on DC+ only, the strong forceful arc is readily controlable and the high silicon content of the alloy lowers the surface tension of the molten weld pool, thus allowing ease of weaving and thus minimal dilution. Weld beads are bright and smooth and free from porosity. The slag volume is minimal and metal recovery is about 90% with respect to weight of the consumable. APPLICATIONS AND MATERIALS TO BE WELDED This alloy produces hard non-machinable deposits with high resistance to abrasion and may be used to surface structural steels using FC-34 as a buffer, or 14Mn steels using FC-307 as a buffer layer. Applications occur on earth moving and dredging equipment, augers handling abrasive sands and sludges, cement producing equipment. WELD METAL ANALYSIS COMPOSITION % BY Wt. MIN. MAX. TYPICAL C 3.5 4.5 4.0 Mn - 1.0 0.8 Si 0.7 2.0 1.2 S - 0.03 0.02 P - 0.04 0.02 Cr 28 32 30 Fe Bal. WELD METAL HARDNESS (ALL WELD METAL) TYPICAL HARDNESS VALUES ON MILD STEEL 150°C INTERPASS TEMPERATURE 1 ST LAYER 2 ND LAYER 3 RD LAYER VICKERS (HV) 450 - 550 575 - 675 675 - 750 ROCKWELL (HRC) 45 - 52 54 - 56 56 - 62 WELDING AMPERAGE DC+ Ø (mm) 2.4 2.8 3.2 MIN. 250 300 350 MAX. 350 400 450 OTHER DATA Wires that have become damp should be re-dried at 120°C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for details. WI-0304 DS162 FC-60, Rev. 1, Date 01.05.2009

Dilihat

  • 304 Total Views
  • 170 Website Views
  • 134 Embedded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 6

  • 20 sentral.indoteknik.com
  • 20 indoteknikcom.odoo.com
  • 1 indoteknik.com
  • 1 indoteknik.co.id
  • 1 depoperkakas.com
  • 2 ezmaro.com