Nikko Steel Kawat Las Elektroda Self Gas Shielding Tubular Wires Surfacing Alloys FC-58

Brosur & Katalog Produk / Brosur & Katalog Produk

450 views
0 Likes
0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 11 FC-58 SELF GAS SHIELDING FLUX AND METAL FILLED CORED WIRE FOR HARD FACING APPLICATIONS INVOLVING ABRASION AND IMPACT DATA SHEET NO. 161 SPECIFICATION DIN 8555 CLASSIFICATION MF10-60-GC PRODUCT DESCRIPTION A self-shielded flux cored wire that deposits chromium carbides in the weld matrix to have the hardness in the range 55~58 HRC. The deposit has very high hardness which giving resistance to extreme abrasion, high temperature stability and some corrosion resistance. It is not machinable or heat treatable but can be ground. WELDING FEATURES OF THE ELECTRODE Suitable for use on DC+ only, the strong forcefull arc is readily controllable and the high silicon content of the alloy lowers the surface tension of the molten weld pool, thus allowing ease of weaving and thus minimal dilution. Weld beads are bright and smooth and free from porosity. The slag volume is minimal and metal recovery is about 90% with respect to weight of the consumable. APPLICATIONS AND MATERIALS TO BE WELDED This alloy produces hard non-machinable deposits with high resistance to abrasion and may be used to surface structural steels using FC-34 as a buffer, or on 14Mn steels using FC-307 as a buffer layer. Applications occur on earth moving and dredging equipment, augers handling abrasive sands and sludges, cement producing equipment. FC-58 is one of a family of complex chrome carbide alloys, the others being FC-60 and FC-63. As the pre-fix of this range increases, so does the chrome carbide and thus abrasion resistance, but the resistance to impact loading decreased slightly. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr Fe MIN. 2.5 - 0.7 - - 20 MAX. 3.5 1.0 2.0 0.03 0.04 25 TYPICAL 3.0 0.8 1.2 0.02 0.02 22 Bal. WELD METAL HARDNESS (ALL WELD METAL) TYPICAL HARDNESS VALUES ON MILD STEEL 150°C INTERPASS TEMPERATURE 1 ST LAYER 2 ND LAYER 3 RD LAYER VICKERS (HV) 440 - 500 600 - 700 650 - 750 ROCKWELL (HRC) 44 - 50 55 - 58 57 - 59 WELDING AMPERAGE DC+ Ø (mm) 2.4 2.8 3.2 MIN. 250 300 350 MAX. 350 400 450 OTHER DATA Wires that have become damp should be re-dried at 120°C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for details WI-0304 DS161 FC-58, Rev. 1, Date 01.05.2009

Dilihat

  • 450 Total Views
  • 292 Website Views
  • 158 Embedded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 5

  • 20 sentral.indoteknik.com
  • 46 indoteknikcom.odoo.com
  • 3 indoteknik.co.id
  • 2 indoteknik.com
  • 1 depoperkakas.com