Nikko Steel Kawat Las Elektroda For Ferritic, Austenitic and Duplex Stainless Steels NSD-308

Brosur & Katalog Produk / Brosur & Katalog Produk

820 views
0 Likes
0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. UNCONTROLLED MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 6 NSD-308 FOR WELDING AUSTENITIC STAINLESS STEELS CONTAINING A NOMINAL 19Cr AND 10Ni DATA SHEET NO. 59 SPECIFICATION AWS A5.4 BS EN ISO 3581-A JIS Z 3221 CLASSIFICATION E308-15 E 19 9 B D308-15 PRODUCT DESCRIPTION A chemically basic flux with a low level of silicio us minerals together with small alloy additions to compensate for arc losses. The flux is concentrically extruded onto a fully al loyed core wire and bound by a blend of silicates that assures both coating streng th and resistance to subsequent moisture absorption. WELDING FEATURES OF THE ELECTRODE Suitable for use on DC+ only the arc is very forcef ul but the nature of the molten slag allows easy vertical up and overhead welding. Ideal for site welding as the extra shielding gas f rom the basic minerals ensures safety against porosity, even in windy conditions. APPLICATIONS AND MATERIALS TO BE WELDED Applications for the electrode are to be found in t he Chemical, Petro-Chemical and Cryogenic Processing and Storage Industries as well as the Food, Brewery and Pharmaceutical Industries using the following m aterials: ASTM 304 CF3 CF8 UNS S30400 S30453 Plus ASTM 301, 302, and 303 C Mn Si S P Cr Ni Mo Cu Fe FN MIN - 0.5 - - - 18 9.0 - - 3 MAX 0.08 2.5 1.0 0.03 0.04 21 11 0.75 0.75 10 WELD METAL ANALYSIS COMPOSITION % BY Wt. TYPICAL 0.04 1.0 0.6 0.01 0.02 19 10.5 0.10 0.2 Bal. 6 PROPERTY UNITS MINIMUM TYPICAL OTHERS Tensile strength N/mm 2 550 600 0.2% Proof stress N/mm 2 - 400 Elongation on 4d % 30 45 Reduction of Area (RA) % - 43 WELD METAL PROPERTIES (ALL WELD METAL) Impact energy -196 o C J - 40 Ø (mm) 2.0 2.6 3.2 4.0 5.0 MIN 35 65 80 120 170 WELDING AMPERAGE DC+ MAX 80 100 125 170 250 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS59 NSD-308 Rev. 3, Date 01.11.2013

Dilihat

  • 820 Total Views
  • 588 Website Views
  • 232 Embedded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 4

  • 56 indoteknikcom.odoo.com
  • 51 sentral.indoteknik.com
  • 3 indoteknik.com
  • 7 indoteknik.co.id