Nikko Steel Kawat Las Elektroda For Hardfacing and Resurfacing - Build up C-76

Brosur & Katalog Produk / Brosur & Katalog Produk

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 9 C -76 A BALANCED RUTILE-AMPHOTERIC OXIDE FLUX COATED MMA ELECTRODE DEPOSITING A NICKEL BASED ALLOY HIGH IN BOTH CHROMIUM DATA SHEET NO. 141 SPECIFICATION AWS A5.13 CLASSIFICATION ENiCrMo-5 (nearest) PRODUCT DESCRIPTION The metallurgically engineered chemically neutral flux containing the major alloying elements is extruded onto a pure nickel core wire. The blend of silicates used during electrode production ensures both coating strength and resistance to subsequent moisture absorption. Metal recovery is some 150% with respect to weight of the core wire. WELDING FEATURES OF THE ELECTRODE Suitable for use on both AC and DC. Welds with a very stable, directional but low penetrating arc. Weld beads are exceptionally smooth and evenly rippled. Slag is normally self detaching and fillet welds slightly concave. The slag is fairly fluid allowing full control of run-out length and the smaller diameters are suited for positional welding. APPLICATIONS AND MATERIALS TO BE WELDED Extensively used to surface dies used in the drop forging industry when a combination of resistance to oxidation at elevated temperature is needed combined with thermal stability. Good initial hardness and the ability to work harden. It is of particular value when such dies need to be precision machined and extra ductility is needed at elevated temperature. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr Fe Mo V W Ni MIN - - - - - 14 - 14 - 3.0 MAX 0.12 1.0 1.0 - - 18 0.4 18 7.0 5.0 TYPICAL 0.02 0.23 0.8 0.01 0.01 16 0.2 16.5 1.0 4.0 Bal. WELD METAL PROPERTIES (ALL WELD METAL) PROPERTY UNITS TYPICAL OTHERS Tensile strength N/mm 2 780 0.2% Proof stress N/mm 2 550 Elongation on 4d % 20 Reduction of Area (RA) % 22 Impact energy 20 o C J 60 Hardness as welded 240-260 HV Will work hardened rapidly to 450 HV WELDING AMPERAGE AC or DC+ Ø (mm) 3.2 4.0 5.0 MIN 90 130 170 MAX 130 180 200 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS141 C-76, Rev. 0, Date 01.09.2008

Dilihat

  • 174 Total Views
  • 114 Website Views
  • 60 Embeded Views

Tindakan

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 2

  • 2 sentral.indoteknik.com
  • 15 indoteknikcom.odoo.com